Product Introduction
Using of solar panels to power street lamps in parking lots can save more energy. With the function of infrared microwave induction, the configuration of solar street lamp can be more economical. Lead-acid batteries and lithium-ion batteries are optional options for solar storage systems, however, lithium-ion batteries have a higher cost performance ratio. Moreover, the cycle times are greater than that of lead acid, so the service life of lithium-ion battery is longer than that of lead acid battery. Our Solar LED Parking Lot Lights are widely used in schools, communities, parks and other places. Please let us know if you are interested!
Parameters of LED parking lot lights
LED Power | 20W~100W |
Fixture Materials | ADC12 die-cast aluminum |
Chip Brand | Philips Bridgelux |
Chip type | 3030 chip |
Lumination Distribution | Bat wing shape |
Luminaire Efficiency | >150lm/W |
Color Temperature | 3000~6000k |
CRI | ≥ Ra70 |
LED Lifespan | > 50000h |
IP Grade | IP65 |
Working Temperature | -40"C~+50"C |
Working Humidity | 10%-90% |
Parameters of Solar Panel
Module Type | Monocrystalline |
Range Power | 30W~150W/ piece |
Power Tolerance | ±3% |
Solar Cell | Monocrystalline 156*156mm |
Cell efficiency | 17.3%~19.1% |
Module efficiency | >18.5% |
Operating temperature | -40℃~85℃ |
Type of connector | MC4 ( Optional ) |
Nominal operating cell temperature | 45±5℃ |
Lifetime | More than 25 years |
Parameters of Lithium Battery
Type | Lithium iron phosphate Battery |
Operating Voltage | 12V |
Rated capacity | 20AH~120AH/box |
Battery storage working temperature | -25℃~60℃ |
Working humidity | No more than 85% RH |
Rating Current | 10A |
Protection Mode | Overcharge, over-discharge and overload protection, as well as short-circuit and reverse connection protection |
Controller Efficiency | >95% |
Lifetime | 5~7 years |
Parameters of Solar Panel LED Lighting pole
Material | Q235 Steel |
Type | Octagonal or Conical |
Height | 5~15M |
Galvanizing | Hot dip galvanized (average 100 micron) |
Powder Coating | Customized powder coating color |
Wind Resistance | Designed to with stand wind speed of 160km/hr |
Life Span | >20 years |
Parameters of Anchor Bolt
Material | Q235 Steel |
Bolts and Nuts Material | Stainless Steel |
Galvanizing | Cold dip galvanized process ( optional ) |
Features | Detachable, helping to save transport space and cost |
Details
Matters needing attention
If the user installs the lamp on the ground by himself, the precautions are as follows:
1. Solar street lamp uses solar radiation as energy source. Whether the sunlight shines on the solar cell module is sufficient directly affects the lighting effect of the lamp. Therefore, when choosing the installation location of the lamp, the solar cell module can illuminate the sunlight at any time, and there is no shield such as leaves.
2. When threading, we must pay attention to the wire not clamped at the connection of the lamp pole. The connection of the wire should be firm and winded with PVC tape.
3. When in use, in order to ensure the beauty and better reception of solar radiation, please clean the dust on the battery assembly every six months, but do not rinse it with water from bottom to top.
Application
Production process
FAQ
1. How to place an order for solar LED parking lot light?
Firstly, send us orders by e-mail with your detail information, then we will send you a Pl to confirm.
Secondly, if all information is right and you can make payment.
Finally, we will arrange order in time once received your payment.
2. What about payment for LED parking lot light?
30% the amount should be paid before producing, the balance 70% of the payment should be paid before shipping.
3. What about the lead time for LED parking lot light?
A: 3-7 workdays for sample, 10-20 workdays for batch order according to your quantity
4. How long does it ship to my country and which delivery method are available?
It usually takes 3-7 business days ship to any country. We use UPS, DHL, TNT, EMS, FedEx etc to delivery our products.