Outdoor Solar Light Pole is widely used in urban streets, parks, squares, gardens, villas, seaside and so on. This lamp is made of high quality metal material with special surface painting treatment. Therefore, it has good strength and good resistance to corrosion and rust. The Outdoor Solar Light Pole has high brightness, can give a long service life with stable lighting performance. We can supply you with this product in a large quantity at wholesale price. Please let us know if you are interested!
1. Outdoor solar light pole is made of high-quality hot rolled steel, which is a tapered rod bent and formed at a time. The lamp post is made of 4mm thick steel plate. The wall thickness of the lamp post does not include the thickness of the galvanized layer.
2. The surface of the lamp post is smooth, and there must not be any cracks, leaks, continuous blowholes, undercuts, or inequalities. The straight line error of the center line of the lamp post does not exceed 0.02% of the length of the pole, the appearance of the pole body is free of unevenness and no traces, and the appearance of the pole is free of obvious defects.
3. The welding method of the lamp post is automatic sub-arc welding, ultrasonic flaw detection, and the socket connection method of the lamp post is fixed by nailing and jacking.
4. Outdoor solar light pole adopts hot-dip galvanized anti-corrosion treatment, the zinc layer is not less than 75 microns, the surface is practical and smooth, and the color is basically the same. It does not peel and flake after the hammer test, and the galvanizing life is not less than 20 years.
5. Light pole manufacturers use high-quality outdoor pure polyester plastic powder for light spraying. The color is to be negotiated, the surface is smooth, the quality of the plastic layer is stable, no fading, no shedding, strong adhesion, strong ultraviolet resistance, and the service life is not less than 20 years.
Hot rolled steel, Q235,Q345,S235,S355,SS400,Gr 50
Yield strength of Material
Minimum yield strength>=235n/mm2 for Q235, S235 and SS400
|Minimum yield strength>=345n/mm2 for Q345 S355 and Gr 50|
3m ~ 12m
Length of one part
Within 16m once forming without slip joint
2~5mm or more
Pole's Shape Available
Round, Polygonal, Taper Octagonal, Taper round, Round conical,
Taper Square, Square.
Arm type can be made:
Single arm, Double arm, Tri-arm, Four-arm
Diameter as 42mm, 48mm, 60mm, 76mm and etc, can fit to any diameter’s lamps.
Advanced submerge-arc welding and CNC welidng equipment. It has past flaw testing, internal and
double welding makes the welding beautiful in shape.
400 pcs /day
Wall thickness Tolerance
+- 0.1mm from 2.3mm to 4mm. +- 0.2mm from 5mm to 20mm.
+- 0.5mm from 22mm to 30mm
( RAL ) Color card or customized
Surface treatment 1
Hot dip Galvanizing antirust.
Surface treatment 2
Hot dip galvanizing with power coating
-35 °C~+45 °C
Aganist wind pressure of 120Km/h to 180Km/h, it according to client’s design.
Base plate mounted
Base plate is square, octagonal or round in shape with slotted holes for
anchor bolt and dimension as per customer’s requirement.
The length buried underground as per customer’s requirement.
According to ISO9001-2008 requirements.
Less land occupation & easy maintenance.
Raw material test → Cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Galvanization or powder coating ,painting →Recalibration →Thread →Packages