Introduction of the 12W LED solar street light
Solar street lamp should be installed on sunny days. If the device is installed on cloudy and rainy days, it will not meet the lighting requirement if it only consumes electricity and does not charge after the lamp is turned on. Solar street lamps should not be turned on the day they are installed. Because the new batteries are not fully charged when they leave the factory. If the device is turned on at the end of the day, it will not be able to reach the required number of rainy days. The correct way is to connect the controller after the device is finished, but not the load. The next day, after charging for one day in the daytime, the load will be added at dusk, so that the capacity of the battery can reach a higher level.
Product Parameter (specification) of the 12W LED solar street light
12 w led solar street light
16V 20W, Mono-Crystalline
6AH 12.8V LiFePo4
Garden, courtyard, road, outdoor, etc.
The above configuration is only for reference and the actual configuration is designed according to the local climate conditions and the customer special requirements.
Product details of the 12W LED solar street light
Application of the 12W LED solar street light
Production process of the 12W LED solar street light