Product Introduction
Solar powered LED Street light uses natural light source to reduce the consumption of electric energy. There may be hidden safety hazards caused by construction quality, material aging, power supply malfunction and other reasons in municipal street lights. Solar power LED street lights do not use alternating current, but use batteries to absorb solar energy and convert low-voltage direct current into light energy. There is no potential safety hazard. The solar powered street light is controlled by intelligent controller, which can automatically adjust the brightness of the lamp according to the natural brightness of the sky within 1 day and the brightness that people need in various environments..
LED Power | 20W~80W |
Fixture Materials | ADC12 die-cast aluminum |
Chip Brand | Philips Bridgelux |
Chip type | 3030 chip |
Luminous Distribution | Bat wing shape |
LED rated Luminous Efficiency | >130lm/W |
LED Luminous Efficiency | >150lm/W |
Color Temperature | 3000~6000k |
CRI | ≥ Ra70 |
LED Lifespan | > 50000h |
IP Grade | IP65 |
Working Temperature | -40"C~+50"C |
Working Humidity | 10%-90% |
Parameters of Solar Panel
Module Type | Mono crystalline |
Range Power | 30-120W |
Power Tolerance | ±3% |
Solar Cell | Mono crystalline 156*156mm |
Cell efficiency | 17.3%~19.1% |
Module efficiency | >18.5% |
Operating temperature | -40℃~85℃ |
Type of connector | MC4 ( Optional ) |
Nominal operating cell temperature | 45±5℃ |
Lifetime | More than 25 years |
Parameters of Lithium Battery
Type | Lithium iron phosphate Battery |
Operating Voltage | 12V |
Rated capacity | 24AH |
Battery storage working temperature | -25℃~60℃ |
Working humidity | No more than 85% RH |
Rating Current | 10A |
Protection Mode | Overcharge, over-discharge and overload protection, as well as short-circuit and reverse connection protection |
Controller Efficiency | >95% |
Lifetime | 5~7 years |
Parameters of the pole
Material | Q235 Steel |
Type | Octagonal or Conical |
Height | 4M/5M |
Galvanizing | Hot dip galvanized (average 100 micron) |
Powder Coating | Customized powder coating color |
Wind Resistance | Designed to with stand wind speed of 160km/hr |
Life Span | >20 years |
Parameters of Anchor Bolt
Material | Q235 Steel |
Bolts and Nuts Material | Stainless Steel |
Galvanizing | Cold dip galvanized process ( optional ) |
Features | Detachable, helping to save transport space and cost |
We have different kinds of solar powered led street lights. The above configuration is only for reference and the actual configuration is designed according to the local climate conditions and the customer special requirements.
Product feature and application
1. Green Energy, Lower Power Consumption, Save 60%-80% Than Others.
2. Higher power, higher brightness intensity, Good Color Rendition.
3. Save electricity cost. Save electric transformer and cable cost. Free maintenance
4. Environmental Impact - Eliminate Hazardous Disposal, Low Light Pollution, No Radiation.
5. Longer lifetime
6. Less heat Generated compared to other sources,
7. Downward orientation of Light, could adjust lighting angles and lighting range.
Other Lighting source just could give common round shape and small lighting range
Solar powered LED Street Lights, Single Lamp design, widely used in lighting squares, plazas, mansions, parks, river banks, pedestrian streets and other occasions where lighting is required. We choose high quality LED Chip as its lighting source.
Products details
Product qualification
Good tools are prerequisite to the successful execution of a job. We have modern production and testing equipment for everyone process.
Delivery Shipping and Serving